W-AP BP1 BluePOD Conference Mate

BluePOD® (W-AP BP1)

Dimensions: 10” W (254 mm) x 7.5” D (190.5 mm) x 1.5” H (38 mm)
Weight: 2.75 lb (1.25 kg)
Power Supply:
Input: AC Power Plug is IEC 320-C14.
Output: 24VDC @ 6.7A to DIN Plug.
Power Switch: Rocker; Backlit red LED indicates power on.
Bluetooth Wireless Access Point: Bluetooth 4.2 with aptX HD Support; Connect with CAT 5 or CAT6 cable
Bluetooth Wireless Access Point Chassis: Wall mount type, molded plastic, white (beige) top, some models have a grey bottom
Controller Chassis: Desktop type, black, metal with white and red legends on front, white legends on back.
Inputs:
Microphone or line inputs accept balanced or unbalanced analog signals (10VRMS max.) at a 6 position Phoenix style connector with +, gnd, and – connections. Both microphone inputs
have a +48VDC phantom supply at pins + and – to gnd.
USB: (4) Type A USB Receptacle, USB 1.1 or 2.0 Supported
Microphone: 48v Phantom Microphone (not included)
Williams AV recommend microphone is Audio-Technica Pro 44 Boundary microphone (or
equivalent).

Network: Network access with browser; connect to IP address over Ethernet (RJ45, 10/100 Mbps)
network.
User Access: Mixer controls include volume, mute, etc. are accessible via browser menu.
Bluetooth Range: 50 ft radius (15.24 m)
Outputs: The line output is a balanced or unbalanced analog signal at a 6 position Phoenix style
connector with +, gnd, and – connections.
Speaker: Speaker output (2x) has a 25 watts/channel class D amplifier output impedance is selectable
at 8Ω or 4Ω. Each channel output is a 2 position Phoenix style connector with a + and –
connection.
Integrated Mixer: (2) mic inputs, (2) line inputs and (2) line outputs; (4) USB inputs and (2) speaker outputs.
Acoustic Echo Cancellation (AEC) is placed between both microphone inputs and speaker
outputs.
Operating Environment: 32ºF to 104ºF (0ºC to 40ºC) with 0-90% relative humidity.
Storage: -40ºF to 150ºF (-40ºC to 65ºC )
Warranty: 2-year parts and labor
Approvals: CE, FCC, Industry Canada, RoHS2, WEEE, RCM, PSE

Architecture and Engineering Specs

• The BluePOD® Conference Mate, model number AP BP1, shall be housed in a black metal enclosure.
• The AP BP1 shall be powered by an external 24 VDC power supply via a four pin DIN plug.
• The AP BP1 shall include a Bluetooth Wireless Access Point (B-WAP) offering a 50ft radius Bluetooth range from the B-WAP.
• The AP BP1 shall have all controls be made via a browser connection from a phone or laptop.
• The AP BP1 shall have four USB type A, USB 1.1 or 2.0 supported jacks.
• The AP BP1 shall have a six pole Phoenix style connector for two balanced / unbalanced line level outputs.
• The AP BP1 shall have a six pole Phoenix style connector for two 48 VDC phantom powered
  microphones.
• The AP BP1 shall have an RJ-45 connector for connection to the B-WAP via CAT 5/6 cable.
• The AP BP1 shall have another RJ-45 connector for network access.
• The AP BP1 shall have two selectable 4Ω or 8Ω speaker Phoenix type outputs delivering 25 Watts per channel.
• The AP BP1 shall be covered by a two-year parts and labor warranty.
• The AP BP1 shall be the Williams AV model number AP BP1

• W-RPK 007 Table/shelf mounting kit for BluePOD or BluePOD Solo
• W-RPK 008 Rack panel kit for BluePOD Conference Mate AP BP1
• W-RPK 009 Rack panel kit for BluePOD Solo – AP BP2 and AP BP2 D

Sales sheet:

• Blue Pod_Sell Sheet

Manuals:

• man_235_BluePod
• MAN_236_BluePod_QSG
• MAN_239_BluePodSolo_QSG

Data sheets:

• bluePod_spec
• bluePodSolo_spec

Consultant specification text:

•  AP_BP1_CS
•  AP_BP2_CS
•  AP_BP2_D_CS